Install The Smod - Oracle X5-8 Service Manual

Install the SMOD

4. To remove the SMOD, grab it by its sides and slide it out the server.
"Install the SMOD" on page 200
Next Steps ■
Install the SMOD
This is a cold-service component. Power down the system and disconnect the AC power cables
from the server before performing this procedure.
Perform this procedure after servicing internal SMOD components, such as the HBA, the ESM,
the internal USB ports, and the system battery.
Access this component directly from the rear of the server.
For component serviceability, locations, and designations, see
Before You Begin ■
Designations" on page
"Remove the SMOD" on page
■
1. Ensure that the handles on the SMOD are in their fully open position.
200 Oracle Server X5-8 Service Manual • December 2015
79.
197.
"Component Locations, and