Reset Dldp Statistics - HP 7500 Series High Availability Command Reference

Hide thumbs Also See for 7500 Series:
Table of Contents

Advertisement

Syntax
dldp work-mode { enhance | normal }
undo dldp work-mode
Default
A device operates in normal DLDP mode.
Views
System view
Default command level
2: System level
Parameters
enhance: Specifies the enhanced DLDP mode.
normal: Specifies the normal DLDP mode.
Examples
# Configure the device to operate in enhanced DLDP mode.
<Sysname> system-view
[Sysname] dldp work-mode enhance

reset dldp statistics

Use reset dldp statistics to clear the statistics on DLDP packets passing through a port.
Syntax
reset dldp statistics [ interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Port type and port number.
Usage guidelines
If you do not specify the interface-type interface-number argument, this command clears the statistics on
the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Clear the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> reset dldp statistics
62

Advertisement

Table of Contents
loading

Table of Contents