Reset Portal Packet Statistics; Server-Detect (Portal Authentication Server View) - HP MSR Series Command Reference Manual

[Sysname-portal-websvr-wbs]
Related commands
• display portal web-server
portal apply web-server
•

reset portal packet statistics

Use reset portal packet statistics to clear packet statistics for portal authentication servers.
Syntax
reset portal packet statistics [ server server-name ]
Views
Use view
Predefined user roles
network-admin
Parameters
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
If you do not specify the server server-name argument, this command clears packet statistics for all portal
authentication servers.
Examples
# Clear packet statistics for portal authentication server pts.
<Sysname> reset portal packet statistics server pts
Related commands
display portal packet statistics

server-detect (portal authentication server view)

Use server-detect to enable portal authentication server detection. After server detection is enabled for
a portal authentication server, the device periodically detects portal packets from the server to identify its
reachability status.
Use undo server-detect to restore the default.
Syntax
server-detect [ timeout timeout ] { log | trap } *
undo server-detect
Default
Portal authentication server detection is disabled.
Views
Portal authentication server view
182