Installing The Router; Installing An Air Filter; Mounting The Router On A Workbench - HP FlexNetwork MSR3064 Installation Manual

Installing the router

Installing an air filter

No air filter is provided with the router. Purchase one yourself. Only the MSR3044 and MSR3064
support air filters.
To install an air filter:
Face the left side (side of the inlet vents) of the router.
1.
Install the upper and lower guide rails of the air filter to the chassis. See
2.
Fasten the fastening screws on the guide rails with a Phillips screwdriver.
3.
Figure 4 Installing the upper and lower guide rails
Push the air filter along the slide rails from the rear side of the chassis to the front.
4.
Fasten the captive screws on the air filter.
5.
Figure 5 Pushing the air filter along the guide rails

Mounting the router on a workbench

IMPORTANT:
• Ensure good ventilation and 10 cm (3.94 in) of clearance around the chassis for heat dissipation.
• Avoid placing heavy objects on the router.
9
Figure 4.