Configuring Outbound Mbgp Route Filtering - HP A8800 Configuration Manual

Step
4. Advertise a default route to an
MBGP peer or peer group.

Configuring outbound MBGP route filtering

If several filtering policies are configured, they are applied in the following sequence:
1. filter-policy export
2. peer filter-policy export
3. peer as-path-acl export
4. peer ip-prefix export
5. peer route-policy export
Only the routes that have passed all the configured policies can be advertised.
To configure BGP route distribution filtering policies:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv4 MBGP address
family view.
Command
peer { group-name |
ip-address }
default-route-advertise
[ route-policy
route-policy-name ]
Command
system-view
bgp as-number
ipv4-family multicast
224
Remarks
Not advertised by default.
With the peer default-route-advertise
command executed, the router sends a
default route with the next hop being
itself to the specified MBGP peer or peer
group, whether the default route is
available or not in the routing table.
Remarks
N/A
N/A
N/A