Secondary Accounting (Hwtacacs Scheme View) - HP MSR Series Command Reference Manual
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (625 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
Related commands
display hwtacacs scheme
secondary accounting (HWTACACS scheme view)
Use secondary accounting to specify a secondary HWTACACS accounting server.
Use undo secondary accounting to remove a secondary HWTACACS accounting server.
Syntax
secondary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string
| single-connection | vpn-instance vpn-instance-name ] *
undo secondary accounting [ { ipv4-address | ipv6 ipv6-address } [ port-number | vpn-instance
vpn-instance-name ] * ]
Default
No secondary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the secondary HWTACACS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the secondary HWTACACS accounting server.
port-number: Specifies the service port number of the secondary HWTACACS accounting server. The
value range for the TCP port number is 1 to 65535, and the default setting is 49.
key { cipher | simple } string: Specifies the shared key for secure communication with the secondary
HWTACACS accounting server.
cipher string: Sets a ciphertext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 373 characters.
In FIPS mode, the key is a string of 15 to 373 characters.
simple string: Sets a plaintext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 255 characters.
In FIPS mode, the key is a string of 15 to 255 characters. The string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection: The device and the secondary HWTACACS accounting server use the same TCP
connection to exchange all accounting packets for all users. If you do not specify this keyword, the device
establishes a new TCP connection each time it exchanges accounting packets with the secondary
accounting server for a user. If the HWTACACS server supports the single-connection method, HP
recommends that you specify this keyword to reduce TCP connections for improving system performance.
90
Advertisement
Table of Contents
