Info-Center Syslog Min-Age; Info-Center Syslog Trap Buffersize - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

At this time, the system receives log information. It displays the log information first, and then
displays your previous input, which is display current- in this example.
%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Sysname] display current-
Enter configuration to complete the display current-configuration command, and press the
Enter key to execute the command.
# Enable synchronous information output, and then save the current configuration (enter interactive
information).
<Sysname> system-view
[Sysname] info-center synchronous
Info-center synchronous output is on
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:
At this time, the system receives the log information. It displays the log information first and then
displays [Y/N].
%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Y/N]:
Enter Y or N to complete your input.

info-center syslog min-age

Use info-center syslog min-age to set the minimum storage period for logs in the log buffer and log
file.
Use undo info-center syslog min-age to restore the default.
Syntax
info-center syslog min-age min-age
undo info-center syslog min-age
Default
The log minimum storage period is not set.
Views
System view
Predefined user roles
network-admin
Parameters
min-age: Sets the minimum storage period in hours. The value range is 1 to 8760.
Examples
# Set the log minimum storage period to 168 hours.
<Sysname> system-view
[Sysname] info-center syslog min-age 168

info-center syslog trap buffersize

Use info-center syslog trap buffersize to set the maximum number of log traps that can be stored
in the log trap buffer.
Use undo info-center syslog trap buffersize to restore the default.
348