Enable Log Updown; Info-Center Diagnostic-Logfile Enable - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

enable log updown

Use enable log updown to enable an interface to generate link up or link down logs when the
interface state changes.
Use undo enable log updown to disable an interface from generating link up or link down logs
when the interface state changes.
Syntax
enable log updown
undo enable log updown
Default
All interfaces are allowed to generate link up and link down logs.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable port FortyGigE 1/0/1 from generating link up or link down logs.
<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] undo enable log updown

info-center diagnostic-logfile enable

Use info-center diagnostic-logfile enable to enable saving diagnostic logs to the diagnostic log
file.
Use undo info-center diagnostic-logfile enable to disable saving diagnostic logs to the diagnostic
log file.
Syntax
info-center diagnostic-logfile enable
undo info-center diagnostic-logfile enable
Default
Saving diagnostic logs to the diagnostic log file is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the system to save generated diagnostic logs to the diagnostic log file for
centralized management. This facilitates users in monitoring device activities and debugging
problems by viewing the diagnostic logs.
Examples
# Enable saving diagnostic logs to the diagnostic log file.
85