Netstream Configuration Commands; Display Ip Netstream Cache - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

NetStream configuration commands

display ip netstream cache

Use display ip netstream cache to display NetStream entry information.
Syntax
In standalone mode:
display ip netstream cache [ slot slot-number ] [ verbose ]
In IRF mode:
display ip netstream cache [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays information about NetStream entries for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, the command displays
information about NetStream entries for all cards. (In IRF mode.)
verbose: Displays detailed information about the NetStream entries.
Examples
# (In standalone mode.) Display detailed information about NetStream entries for the card in slot 1.
<Sysname> display ip netstream cache slot 1 verbose
IP NetStream information:
Active flow timeout
Inactive flow timeout
Max number of entries
IP active flow entries
MPLS active flow entries
L2 active flow entries
IPL2 active flow entries
IP flow entries counted
MPLS flow entries counted
L2 flow entries counted
IPL2 flow entries counted
Last statistics resetting time
IP packet size distribution (1103746 packets in total):
: 5 min
: 300 sec
: 8192
: 1
: 0
: 1
: 1
: 10
: 0
: 10
: 20
: 01/01/2012 at 00:01:02
314