Ipv6 Netstream Commands; Display Ipv6 Netstream Cache - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

IPv6 NetStream commands

display ipv6 netstream cache

Use display ipv6 netstream cache to display IPv6 NetStream entry information.
Syntax
In standalone mode:
display ipv6 netstream cache [ slot slot-number ] [ verbose ]
In IRF mode:
display ipv6 netstream cache [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information about IPv6 NetStream entries for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device or specifies a
PEX. The chassis-number argument represents the member ID of the IRF member device or the
virtual chassis number of the PEX. The slot-number argument represents the slot number of the card
or PEX. On an IRF fabric, this command displays information about IPv6 NetStream entries for all
cards if you do not specify a card. On an eIRF system, this command displays information about IPv6
NetStream entries for all cards and PEXs if you do not specify a card or PEX. (In IRF mode.)
verbose: Displays detailed information about IPv6 NetStream entries.
Examples
# Display information about IPv6 NetStream entries.
<Sysname> display ipv6 netstream cache
IPv6 NetStream cache information:
Active flow timeout
Inactive flow timeout
Max number of entries
IPv6 active flow entries
MPLS active flow entries
IPL2 active flow entries
IPv6 flow entries counted
MPLS flow entries counted
IPL2 flow entries counted
Last statistics resetting time
IPv6 packet size distribution (0 packets in total):
: 60 min
: 10 sec
: 1000
: 1
: 0
: 1
: 10
: 0
: 20
: 01/01/2000 at 00:01:02
321