Display Process - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Related commands
•
monitor kernel starvation enable
•
monitor kernel starvation exclude-thread
•
monitor kernel starvation time

display process

Use display process to display process state information.
Syntax
display process [ all | job job-id | name process-name ] [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all processes. With the all keyword or without any parameters, the command displays
state information for all processes.
job job-id: Specifies a process by its job ID, in the range of 1 to 2147483647. Each process has a
fixed job ID.
name process-name: Specifies a process by its name, a case-insensitive string of 1 to 15 characters
that must not contain question marks or spaces.
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays process state information for the master device.
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display state information for process scmd.
<Sysname> display process name scmd
TID LAST_CPU
1
Job ID: 1
Parent JID: 0
Parent PID: 0
Executable path: -
Instance: 0
Respawn: OFF
Respawn count: 1
Max. spawns per minute: 0
Last started: Wed Jun
Process state: sleeping
Max. core: 0
ARGS: -
Stack
0 0K
PID: 1
1 14:45:46 2013
PRI State HH:MM:SS:MESC
120 S 0:0:5:220
280
Name
scmd