Display Rtm Environment - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Syntax
commit
Default
No CLI-defined policies are enabled.
Views
CLI-defined policy view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You must execute this command for a CLI-defined policy to take effect.
After changing the settings in a policy that has been enabled, you must re-execute this command for
the changes to take effect.
Examples
# Enable the CLI-defined policy test.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] commit

display rtm environment

Use display rtm environment to display user-defined EAA environment variables and their values.
Syntax
display rtm environment [ var-name ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
var-name: Specifies a user-defined EAA environment variable by its name. If you do not specify a
variable, this command displays all user-defined EAA environment variables.
Examples
# Display all user-defined EAA environment variables.
<Sysname> display rtm environment
Name
config_cmd
save_cmd
show_run_cmd
Value
interface m1/0/1
save main force
display current-configuration
234