Snmp-Agent Trap If-Mib Link Extended - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

Parameters
configuration: Specifies configuration notifications. If configuration notifications are enabled, the
system checks the running configuration and the startup configuration every 10 minutes for any
change and generates a notification for the most recent change.
protocol: Specifies a module for enabling SNMP notifications. For more information about this
argument, see the command reference for each module.
standard: Specifies SNMP standard notifications.
Table 43 Standard SNMP notifications
Keyword
authentication
coldstart
linkdown
linkup
warmstart
system: Specifies system notifications sent when the system time is modified, the system reboots,
or the main system software image is not available.
Usage guidelines
The snmp-agent trap enable command enables the device to generate notifications, including both
informs and traps, even though the keyword trap is used in this command.
You can use the snmp-agent target-host command to enable the device to send the notifications as
informs or traps to a host.
If no optional parameters are specified, this command or its undo form enables or disables all SNMP
notifications supported by the device.
Examples
# Enable the SNMP agent to send SNMP authentication failure traps to 10.1.1.1 in the community
public.
<Sysname> system-view
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public
[Sysname] snmp-agent trap enable standard authentication
Related commands
snmp-agent target-host

snmp-agent trap if-mib link extended

Use snmp-agent trap if-mib link extended to configure the SNMP agent to send extended
linkUp/linkDown notifications.
Use undo snmp-agent trap if-mib link extended to restore the default.
Syntax
snmp-agent trap if-mib link extended
undo snmp-agent trap if-mib link extended
Definition
Authentication failure notification sent when an NMS fails to authenticate to the
SNMP agent.
Notification sent when the device restarts.
Notification sent when the link of a port goes down.
Notification sent when the link of a port comes up.
Notification sent when the SNMP agent restarts.
193

Advertisement

Table of Contents
loading

Table of Contents