Snmp-Agent Target-Host - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Predefined user roles
network-admin
Parameters
all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
Usage guidelines
SNMPv1 and SNMPv2c settings in this command are supported only in non-FIPS mode.
Configure the SNMP agent with the same SNMP version as the NMS for successful communications
between them.
Examples
# Enable SNMPv3.
<Sysname> system-view
[Sysname] snmp-agent sys-info version v3
Related commands
display snmp-agent sys-info

snmp-agent target-host

Use snmp-agent target-host to configure the SNMP agent to send SNMP notifications (informs or
traps) to a host.
Use undo snmp-agent target-host to remove an SNMP notification target host.
Syntax
In non-FIPS mode:
snmp-agent target-host inform address udp-domain { target-host | ipv6 target-host } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string { v2c | v3
[ authentication | privacy ] }
snmp-agent target-host trap address udp-domain { target-host | ipv6 target-host } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string [ v1 | v2c
| v3 [ authentication | privacy ] ]
undo snmp-agent target-host { trap | inform } address udp-domain { target-host | ipv6
target-host } params securityname security-string [ vpn-instance vpn-instance-name ]
In FIPS mode:
snmp-agent target-host inform address udp-domain { target-host | ipv6 target-host } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
{ authentication | privacy }
snmp-agent target-host trap address udp-domain { target-host | ipv6 target-host } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
{ authentication | privacy }
undo snmp-agent target-host { trap | inform } address udp-domain { target-host | ipv6
target-host } params securityname security-string [ vpn-instance vpn-instance-name ]
Default
No SNMP notification target host is configured.
141