Display Snmp-Agent Context - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Community name: userv1
Group name: testv1
Storage-type: nonvolatile
Community name: cc
Group name: cc
ACL name: testacl
Storage-type: nonVolatile
Table 31 Command output
Field
Community name
Group name
Role name
ACL
ACL name
Storage-type
Context name
Related commands
snmp-agent community
snmp-agent usm-user { v1 | v2c }

display snmp-agent context

Use display snmp-agent context to display SNMP contexts.
Description
Community name created by using the snmp-agent community command or
username created by using the snmp-agent usm-user { v1 | v2c } command.
SNMP group name.
• If the community is created by using the snmp-agent community command in
VACM mode, the group name is the same as the community name.
• If the community is created by using the snmp-agent usm-user { v1 | v2c }
command, the name of the group that has the user is displayed.
User role name for the community.
If the community is created by using the snmp-agent community command in
RBAC mode, a user role can be bound to the community name.
Number of the ACL.
This field appears only when an ACL is specified for the SNMPv1 or SNMPv2c
community. It is exclusive with the ACL name field.
Name of the ACL.
This field appears only when an ACL is specified for the SNMPv1 or SNMPv2c
community. It is exclusive with the ACL field.
Storage type:
• volatile—Settings are lost when the system reboots.
• nonVolatile—Settings remain after the system reboots.
• permanent—Settings remain after the system reboots and can be modified but
not deleted.
• readOnly—Settings remain after the system reboots and cannot be modified or
deleted.
• other—Any other storage type.
SNMP context:
• If a mapping between the SNMP community and an SNMP context is
configured, the SNMP context is displayed.
• If no mapping between the SNMP community and an SNMP context exists, this
field is empty.
153