Configuring Dns Proxy; Enabling Dynamic Domain Name Resolution; Enabling Dns Proxy - HPE FlexNetwork MSR Series Configuration Manual
Comware 5 web-based
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (740 pages) ,
- Comware 7 layer 3 - ip services configuration manuals (554 pages) ,
- Comware 5 security configuration manual (547 pages)
Table of Contents
Advertisement
Configuring DNS proxy
Task
Enabling DNS proxy
Specifying a DNS server
Enabling dynamic domain name resolution
1.
From the navigation tree, select Advanced > DNS Setup > DNS Configuration to enter the
configuration page as shown in
2.
Select Enable for Dynamic DNS.
3.
Click Apply.
Figure 194 Dynamic domain name resolution configuration
Enabling DNS proxy
1.
From the navigation tree, select Advanced > DNS Setup > DNS Configuration to enter the
configuration page as shown in
2.
Select Enable for DNS Proxy.
3.
Click Apply.
Remarks
Required.
Enable DNS proxy on the device.
Disabled by default.
Required.
Not specified by default.
You can specify up to six DNS servers.
Figure
194.
Figure
194.
183
- Quick Links:
- Logging in to the Web Interface
Hide quick links:
Advertisement
Table of Contents
