Configuring Parameter Profiles; Configuring A Parameter Profile - HPE FlexNetwork MSR series Configuration Manual

Step
mode.
5. Specify the network service
to which
connects.
6. Specify a band for the 4G
modem.

Configuring parameter profiles

Configuring a parameter profile

A parameter profile defines the following items:
•
The access point with which a 3G/4G modem is associated.
•
The authentication mode in which the service provider authenticates the 3G/4G modem.
To configure a parameter profile for a 3G modem:
Step
1. Enter system view.
2. Enter cellular interface view.
3. Create a parameter profile.
4. (Optional.)
parameter profile.
To configure a parameter profile for a 4G modem:
Step
1. Enter system view.
2. Create a profile.
3. Create an APN.
4. Specify
mode for the profile.
5. Specify a separator for the
IMSI/SN
authentication information.
Command
mnc }
mode { 1xrtt | auto | evdo | gsm |
gsm-precedence | hybrid | lte |
the modem
td | td-precedence | wcdma |
wcdma-precedence }
lte band band-number
Command
system-view
controller
interface-number
profile
{
authentication-mode { none |
{ chap | pap } user username
[ password password ] }
Delete the
profile delete profile-number
Command
system-view
apn-profile profile-name
apn { dynamic | static apn }
authentication-mode { pap |
an authentication
chap
user-name password { cipher |
simple } string
attach-format
binding
splitchart
cellular
create profile-number
dynamic | static apn
| pap-chap }
imsi-sn
157
Remarks
the modem model.
The default setting
command and support for the
arguments depend on the modem
model.
The default setting
command and support for the
argument depend on the 4G
modem model.
Remarks
N/A
N/A
If you specify
authentication is performed. If you
specify chap or pap, configure the
}
username and
according to the requirement of
the service provider.
The default setting depends on
the modem model.
N/A
Remarks
N/A
By default, no profiles exist.
By default, no APNs exist.
user By default, no
mode is specified for a profile.
By default, no
split
specified for the IMSI/SN binding
authentication information.
for this
for this
none,
no
password
authentication
separator is