Acl Logging Interval - HPE FlexNetwork HSR6800 series Command Reference Manual

The new ACL has the same properties and content as the source ACL, but uses a different number
or name from the source ACL.
To specify the IPv4 ACL type, do not specify the ipv6 keyword.
Examples
# Create IPv4 basic ACL 2002 by copying IPv4 basic ACL 2001.
<Sysname> system-view
[Sysname] acl copy 2001 to 2002
# Create IPv4 basic ACL paste by copying IPv4 basic ACL test.
<Sysname> system-view
[Sysname] acl copy name test to name paste

acl logging interval

Use acl logging interval to enable logging for packet filtering and set the interval.
Use undo acl logging interval to restore the default.
Syntax
acl logging interval interval
undo acl logging interval
Default
The interval is 0. The device does not generate log entries for packet filtering.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval at which log entries are generated and output. It must be a multiple of
5, in the range of 0 to 1440 minutes. To disable the logging, set the value to 0.
Usage guidelines
The logging feature is available for the following ACL rules that have the logging keyword:
•
IPv4 basic ACL rules.
•
IPv4 advanced ACL rules.
•
IPv6 basic ACL rules.
•
IPv6 advanced ACL rules.
If an ACL is matched for the first time, the device immediately outputs a log entry to record the
matching packet.
Examples
# Configure the device to generate and output packet filtering log entries every 10 minutes.
<Sysname> system-view
[Sysname] acl logging interval 10
Related commands
rule (IPv4 advanced ACL view)
rule (IPv4 basic ACL view)
4