Qos Policy Commands; Traffic Class Commands; Display Traffic Classifier - HPE FlexNetwork HSR6800 series Command Reference Manual

QoS policy commands

Traffic class commands

display traffic classifier

Use display traffic classifier to display traffic classes.
Syntax
In standalone mode:
display traffic classifier { system-defined | user-defined } [ classifier-name ] [ slot slot-number ]
In IRF mode:
display traffic classifier { system-defined | user-defined } [ classifier-name ] [ chassis
chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
system-defined: Specifies system-defined traffic classes.
user-defined: Specifies user-defined traffic classes.
classifier-name: Specifies a traffic class by its name, a case-sensitive string of 1 to 31 characters. If
you do not specify a traffic class, this command displays all traffic classes.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays the traffic classes for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
the traffic classes for the global active MPU. (In IRF mode.)
Examples
# Display all user-defined traffic classes.
<Sysname> display traffic classifier user-defined
User-defined classifier information:
Classifier: 1 (ID 100)
Operator: AND
Rule(s) :
If-match acl 2000
Classifier: 2 (ID 101)
Operator: AND
35