Display Qos Policy User-Profile - HPE FlexNetwork HSR6800 series Command Reference Manual

Green packets : 0 (Packets) 0 (Bytes)
Yellow packets: 0 (Packets) 0 (Bytes)
Red packets
Classifier: 2
Matched : 0 (Packets) 0 (Bytes)
5-minute statistics:
Forwarded: 0/0 (pps/bps)
Dropped
Operator: AND
Rule(s) :
If-match not protocol ipv6
Behavior: 2
Filter enable: Permit
Marking:
Remark mpls-exp 4
Classifier: 3
Matched : 0 (Packets) 0 (Bytes)
5-minute statistics:
Forwarded: 0/0 (pps/bps)
Dropped
Operator: AND
Rule(s) :
-none-
Behavior: 3
-none-
Table 21 Command output
Field
L2VPN-PW
Direction
Matched
5-minute statistics
Forwarded
Dropped
Green packets
Yellow packets
Red packets
For the description of other fields, see

display qos policy user-profile

Use display qos policy user-profile to display QoS policies applied to user profiles.
: 0 (Packets) 0 (Bytes)
: 0/0 (pps/bps)
: 0/0 (pps/bps)
Description
A PW is uniquely identified by a combination of the peer PE IP address
and PW ID.
Direction to which the QoS policy is applied on the PW.
Number of matching packets.
Traffic statistics in the last 5 minutes.
Average rate of successfully forwarded matching packets during a
statistics collection period.
Average rate of dropped matching packets during a statistics collection
period.
Traffic statistics for green packets.
Traffic statistics for yellow packets.
Traffic statistics for red packets.
Table 15 and Table 17.
63