Table of Contents
Advertisement
2 Parameter Description
2.13 Main Menu - Frequency Converter Information - Group 15
2.14.1 15-** Drive Information
2
Parameter group containing frequency converter information such as operating data, hardware configuration and software versions.
2.14.2 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
15-00 Operating Hours
Range:
0 h*
[0 - 2147483647 h]
15-01 Running Hours
Range:
0 h*
[0 - 2147483647 h]
15-02 kWh Counter
Range:
0 kWh*
[0 - 2147483647 kWh]
15-03 Power Up's
Range:
0*
[0 - 2147483647 ]
15-04 Over Temp's
Range:
0*
[0 - 65535 ]
15-05 Over Volt's
Range:
0*
[0 - 65535 ]
15-06 Reset kWh Counter
Option:
[0] *
Do not reset
[1]
Reset counter
NB!
The reset is carried out by pressing [OK].
166
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
View how many hours the frequency converter has run. The value is saved when the frequency
converter is turned off.
Function:
View how many hours the motor has run. Reset the counter in par. 15-07
Counter
. The value is saved when the frequency converter is turned off.
Function:
Registering the power consumption of the motor as a mean value over one hour. Reset the counter
Reset kWh Counter
in par. 15-06
.
Function:
View the number of times the frequency converter has been powered up.
Function:
View the number of frequency converter temperature faults which have occurred.
Function:
View the number of frequency converter overvoltages which have occurred.
Function:
Select
Do not reset
[0] if no reset of the kWh counter is desired.
Select
Reset
[1] and press [OK] to reset the kWh counter to zero (see par. 15-02
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Programming Guide
Reset Running Hours
kWh Counter
).
Advertisement
Table of Contents
