Danfoss VLT Automation VT Drive FC 322 Programming Manual page 128

2 Parameter Description
9-28 Process Control
Option:
2
[0] Disable
[1] * Enable cyclic master
126
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Process control (setting of Control Word, speed reference, and process data) is possible via either
Profibus or standard fieldbus but not both simultaneously. Local control is always possible via the
LCP. Control via process control is possible via either terminals or fieldbus depending on the settings
Coasting Select
in par. 8-50 to par. 8-56
Disables process control via Profibus, and enables process control via standard fieldbus or Profibus
Master class 2.
Enables process control via Profibus Master Class 1, and disables process control via standard field-
bus or Profibus Master class 2.
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Preset Reference Select
.
Programming Guide