Danfoss VLT Automation VT Drive FC 322 Programming Manual page 227

VLT Automation VT Drive FC322
Programming Guide
22-87 Pressure at No-Flow Speed
Range:
0.000* [Application dependant]
22-88 Pressure at Rated Speed
Range:
999999.999 [Application dependant]
*
22-90 Flow at Rated Speed
Range:
0.000* [0.000 - 999999.999 ]
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Enter the pressure H corresponding to Speed at No Flow in Reference/Feedback Units.
MIN
Function:
Enter the value corresponding to the Pressure at Rated Speed, in Reference/Feedback Units. This
value can be defined using the pump datasheet.
Function:
Enter the value corresponding to Flow at Rated Speed. This value can be defined using the pump
datasheet.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
2
225