Table of Contents
Advertisement
VLT Automation VT Drive FC322
Programming Guide
5-66 Terminal X30/6 Pulse Output Variable
Option:
[0] *
No operation
[45]
Bus ctrl.
[48]
Bus ctrl., timeout
[100]
Output freq. 0-100
[101]
Reference Min-Max
[102]
Feedback +-200%
[103]
Motor cur. 0-Imax
[104]
Torque 0-Tlim
[105]
Torque 0-Tnom
[106]
Power 0-Pnom
[107]
Speed 0-HighLim
[108]
Torque +-160%
[109]
Out frq 0-Fmax
[113]
Ext. Closed Loop 1
[114]
Ext. Closed Loop 2
[115]
Ext. Closed Loop 3
[116]
Cascade Reference
5-68 Pulse Output Max Freq #X30/6
Range:
5000 Hz*
[0 - 32000 Hz]
2.7.8 5-9*Bus Controlled
This parameter group selects digital and relay outputs via a fieldbus setting.
5-90 Digital & Relay Bus Control
Range:
0*
[0 - 2147483647 ]
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Select the variable for read-out on terminal X30/6.
This parameter cannot be adjusted while the motor is running.
This parameter is active when option module MCB 101 is installed in the frequency converter.
Function:
Select the maximum frequency on terminal X30/6 referring to the output variable in
par. 5-66
Terminal X30/6 Pulse Output Variable
is running.
This parameter is active when option module MCB 101 is mounted in the frequency converter.
Function:
This parameter holds the state of the digital outputs and relays that is controlled by bus.
A logical '1' indicates that the output is high or active.
A logical '0' indicates that the output is low or inactive.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
. This parameter cannot be adjusted while the motor
2
97
Advertisement
Table of Contents
