Danfoss VLT Automation VT Drive FC 322 Programming Manual page 236

2 Parameter Description
23-51 Period Start
Range:
Application [Application dependant]
dependent*
2
NB!
When mounting an Analog I/O MCB109 option card, a battery back up of the date and time is included.
23-52 Period Stop
Range:
2000-01-01 [2000-01-01 00:00 - 2099-12-31
00:00* 23:59]
23-53 Energy Log
Range:
0* [0 - 4294967295 ]
NB!
All counters are automatically reset when changing the setting in par. 23-50
counters will stop at maximum value.
234
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Function:
Set the date and time at which the Energy Log must stop updating the counters.
If the period defined by par. 23-51 and 23-52 is longer than 24 hours/7 days/31 days (depending
on selection in par. 23-50), the logging will stop when all buffers are used.
Function:
Array with a number of elements equal to the number of counters ([00]-[xx] below parameter
number in display). Press OK and Step between elements by means of
Local Control Panel.
Array elements:
Ener gy met er
23-53 Ener gy met er
(02)
Ener gy met er
23-53 Ener gy met er
(01)
Ener gy met er
23-53 Ener gy met er
(00)
Data from latest period is stored in the counter with the highest index.
At power down all counter values are stored and resumed at next power up.
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
and
Ener gy met er 23-5*
23-53 Ener gy met er
(06)
23-5*
Ener gy met er
23-53 Ener gy met er
(05)
23-5*
Ener gy met er
23-53 Ener gy met er
(04)
Ener gy met er 23-5*
23-53 Ener gy met er
(03)
23-5*
23-5*
23-5*
Energy Log Resolution . At overflow the update of the
Programming Guide
buttons on the