Table of Contents
Advertisement
VLT Automation VT Drive FC322
Programming Guide
15-62 Option Ordering No
Range:
0*
[0 - 0 ]
15-63 Option Serial No
Range:
0*
[0 - 0 ]
2.14.8 15-9* Parameter Info
Parameter lists
15-92 Defined Parameters
Array [1000]
Range:
0*
[0 - 9999 ]
15-93 Modified Parameters
Array [1000]
Range:
0*
[0 - 9999 ]
15-99 Parameter Metadata
Array [23]
Range:
0*
[0 - 9999 ]
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Shows the ordering number for the installed options.
Function:
View the installed option serial number.
Function:
View a list of all defined parameters in the frequency converter. The list ends with 0.
Function:
View a list of the parameters that have been changed from their default setting. The list ends with
0. Changes may not be visible until up to 30 seconds after implementation.
Function:
This parameter contains data used by the MCT10 software tool.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
2
173
Advertisement
Table of Contents
