Table of Contents
Advertisement
VLT Automation VT Drive FC322
Programming Guide
[105]
Torque 0-Tnom
[106]
Power 0-Pnom
[107]
Speed 0-HighLim
[108]
Torque +-160%
[109]
Out frq 0-Fmax
[113]
Ext. Closed Loop 1
[114]
Ext. Closed Loop 2
[115]
Ext. Closed Loop 3
[116]
Cascade Reference
[130]
Out frq 0-100 4-20mA
[131]
Reference 4-20mA
[132]
Feedback 4-20mA
[133]
Motor cur. 4-20mA
[134]
Torq.0-lim 4-20 mA
[135]
Torq.0-nom 4-20 mA
[136]
Power 4-20mA
[137]
Speed 4-20mA
[138]
Torque 4-20mA
[139]
Bus ctrl.
[140]
Bus ctrl. 4-20 mA
[141]
Bus ctrl t.o.
[142]
Bus ctrl t.o. 4-20mA
[143]
Ext. CL 1 4-20mA
[144]
Ext. CL 2 4-20mA
[145]
Ext. CL 3 4-20mA
[146]
Cascade Ref. 4-20mA
[150]
Out frq 0-Fmax 4-20mA
6-61 Terminal X30/8 Min. Scale
Range:
0.00 %*
[0.00 - 200.00 %]
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
: 0 - Motor rated torque, (0-20 mA)
: 0 - Motor rated power, (0-20 mA)
: 0 - Speed High Limit (par. 4-13
Motor Speed High Limit [RPM]
Limit [Hz]
), (0-20 mA)
: 0 - 100%, (0-20 mA)
: 0 - 100%, (0-20 mA)
: 0 - 100%, (0-20 mA)
: 0 - 100 Hz
: Minimum Reference - Maximum Reference
: -200% to +200% of par. 20-14
Maximum Reference/Feedb.
: 0 - Inverter Max. Current (par. 16-37
Torque Limit Motor Mode
: 0 - Torque limit (par. 4-16
: 0 - Motor rated torque
: 0 - Motor rated power
: 0 - Speed High Limit (4-13 and 4-14)
: 0 - 100%, (0-20 mA)
: 0 - 100%
: 0 - 100%, (0-20 mA)
: 0 - 100%
: 0 - 100%
: 0 - 100%
: 0 - 100%
Function:
Scales the minimum output of the selected analog signal on terminal X30/8. Scale the minimum
value as a percentage of the maximum signal value, i.e. 0 mA (or 0 Hz) is desired at 25% of the
maximum output value and 25% is programmed. The value can never be higher than the corre-
Terminal X30/8 Max. Scale
sponding setting in par. 6-62
This parameter is active when option module MCB 101 is mounted in the frequency converter.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
and par. 4-14
Inv. Max. Current
)
)
if value is below 100%.
Motor Speed High
2
109
Advertisement
Table of Contents
