Danfoss VLT Automation VT Drive FC 322 Programming Manual page 58

2 Parameter Description
3-11 Jog Speed [Hz]
Range:
Application [Application dependant]
dependent*
2
3-13 Reference Site
Option:
[0] * Linked to Hand / Auto
[1] Remote
[2] Local
3-14 Preset Relative Reference
Range:
0.00 %* [-100.00 - 100.00 %]
56
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Function:
Select which reference site to activate.
Use local reference when in Hand mode; or remote reference when in Auto mode.
Use remote reference in both Hand mode and Auto mode.
Use local reference in both Hand mode and Auto mode.
NB!
When set to Local [2], the frequency converter will start with this setting again
following a 'power down'.
Function:
The actual reference, X, is increased or decreased with the percentage Y, set in par. 3-14
Relative Reference
. This results in the actual reference Z. Actual reference (X) is the sum of the
inputs selected in par. 3-15 Reference 1 Source
3 Source Control Source
and par. 8-02 .
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Programming Guide
, par. 3-16 Reference 2 Source , par. 3-17
Preset
Reference