Danfoss VLT Automation VT Drive FC 322 Programming Manual page 120

2 Parameter Description
8-82 Slave Message Rcvd
Range:
0* [0 - 0 ]
2
8-83 Slave Error Count
Range:
0* [0 - 0 ]
2.9.7 8-9* Bus Jog
Parameters for configuring the Bus Jog.
8-90 Bus Jog 1 Speed
Range:
100 RPM* [Application dependant]
8-91 Bus Jog 2 Speed
Range:
200 RPM* [Application dependant]
118
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
This parameter shows the number of valid telegrams addressed to the slave, sent by the frequency
converter.
Function:
This parameter shows the number of error telegrams, which could not be executed by the frequency
converter.
Function:
Enter the jog speed. This is a fixed jog speed activated via the serial port or fieldbus option.
Function:
Enter the jog speed. This is a fixed jog speed activated via the serial port or fieldbus option.
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Programming Guide