Main Menu - Danfoss VLT Micro Drive FC 51 Series Programming Manual

3. Programming

3.4. Main Menu

The Main Menu gives access to all parameters.
1. To enter the Main Menu, press [MENU] key until indicator in
display is placed above
2. Use [ ] [ ] to browse through the parameter groups.
3
3. Press [OK] to select a parameter group.
4. Use [ ] [ ] to browse through the parameters in the specific
group.
5. Press [OK] to select the parameter.
6. Use [ ] [ ] to set/change the parameter value.
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice to enter
[Menu] once to enter
Illustration 3.10: Indicating Main Menu mode
10
Main Menu .
Quick Menu , or press
Status .
MG.02.C4.02 - VLT is a registered Danfoss trademark
VLT Micro Drive FC 51