Table of Contents
Advertisement
VLT Automation VT Drive FC322
Programming Guide
[12]
Select preset ref 2
[13]
Select preset ref 3
[14]
Select preset ref 4
[15]
Select preset ref 5
[16]
Select preset ref 6
[17]
Select preset ref 7
[18]
Select ramp 1
[19]
Select ramp 2
[22]
Run
[23]
Run reverse
[24]
Stop
[26]
DC Brake
[27]
Coast
[28]
Freeze output
[29]
Start timer 0
[30]
Start timer 1
[31]
Start timer 2
[32]
Set digital out A low
[33]
Set digital out B low
[34]
Set digital out C low
[35]
Set digital out D low
[36]
Set digital out E low
[37]
Set digital out F low
[38]
Set digital out A high
[39]
Set digital out B high
[40]
Set digital out C high
[41]
Set digital out D high
[42]
Set digital out E high
[43]
Set digital out F high
[60]
Reset Counter A
[61]
Reset Counter B
[70]
Start Timer 3
[71]
Start Timer 4
[72]
Start Timer 5
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Selects preset reference 2.
Selects preset reference 3.
Selects preset reference 4.
Selects preset reference 5.
Selects preset reference 6.
Selects preset reference 7. If the active preset reference is changed, it will merge with other preset
reference commands coming from either the digital inputs or via a fieldbus.
Selects ramp 1
Selects ramp 2
Issues a start command to the frequency converter.
Issues a start reverse command to the frequency converter.
Issues a stop command to the frequency converter.
Issues a DC stop command to the frequency converter.
The frequency converter coasts immediately. All stop commands including the coast command stop
the SLC.
Freezes the output frequency of the frequency converter.
SL Controller Timer
Starts timer 0, see par. 13-20
Starts timer 1, see par. 13-20
SL Controller Timer
Starts timer 2, see par. 13-20
SL Controller Timer
Any output with 'digital output 1' selected is low (off).
Any output with 'digital output 2' selected is low (off).
Any output with 'digital output 3' selected is low (off).
Any output with 'digital output 4' selected is low (off).
Any output with 'digital output 5' selected is low (off).
Any output with 'digital output 6' selected is low (off).
Any output with 'digital output 1' selected is high (closed).
Any output with 'digital output 2' selected is high (closed).
Any output with 'digital output 3' selected is high (closed).
Any output with 'digital output 4' selected is high (closed).
Any output with 'digital output 5' selected is high (closed).
Any output with 'digital output 6' selected is high (closed).
Resets Counter A to zero.
Resets Counter A to zero.
SL Controller Timer
Starts timer 3, see par. 13-20
Starts timer 4, see par. 13-20
SL Controller Timer
Starts timer 5, see par. 13-20
SL Controller Timer
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
for further description.
for further description.
for further description.
for further description.
for further description.
for further description.
2
155
Advertisement
Table of Contents
