The LCP indicates (with a wrench-icon and an "M") when it is time for a Preventive Maintenance Action, and can be programmed to be indicated on a
digital output in parameter group 5-3*. The Preventive Maintenance Status may be read in par. 16-96
indication can be reset from a digital input, the FC bus or manually from the LCP through par. 23-15
A Maintenance Log with the latest 10 loggings can be read from parameter group 18-0* and via the Alarm log button on the LCP after selecting Maintenance
Log.
23-10 Maintenance Item
Option:
[1] *
Motor bearings
[2]
Fan bearings
[3]
Pump bearings
[4]
Valve
[5]
Pressure transmitter
[6]
Flow transmitter
[7]
Temperature transm.
[8]
Pump seals
[9]
Fan belt
[10]
Filter
[11]
Drive cooling fan
[12]
System health check
[13]
Warranty
230
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com