Danfoss VLT Automation VT Drive FC 322 Programming Manual page 17

VLT Automation VT Drive FC322
Programming Guide
NB!
For detailed parameter descriptions, please see the following section on
1.1.8 Q3 Function Setups
The Function Setup provides quick and easy access to all parameters required for the majority of water and wastewater applications including variable
torque, constant torque, pumps, dossing pumps, well pumps, booster pumps, mixer pumps, aeration blowers and other pump and fan applications.
Amongst other features it also includes parameters for selecting which variables to display on the LCP, digital preset speeds, scaling of analog references,
closed loop single zone and multi-zone applications and specific functions related to water and wastewater applications.
How to access Function Set-up - example:
Illustration 1.7: Step 1: Turn on the frequency converter (On
LED lights)
Illustration 1.8: Step 2: Press the [Quick Menus] button
(Quick Menus choices appear).
Illustration 1.9: Step 3: Use the up/down navigation keys to
scroll down to Function Setups. Press [OK].
Illustration 1.10: Step 4: Function Setups choices appear.
General Settings
Choose 03-1
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Commonly Used Parameters - Explanations
. Press [OK].
MG.20.W1.22 - VLT is a registered Danfoss trademark
.
Illustration 1.11: Step 5: Use the up/down navigation keys
Analog Outputs
to scroll down to i.e. 03-12
Illustration 1.12: Step 6: Choose parameter 6-50
42 Output . Press [OK].
Illustration 1.13: Step 7: Use the up/down navigation keys
to select between the different choices. Press [OK].
1 How to Programme
1
. Press [OK].
Terminal
15