How To I Nstall Option In Frequency Converter - Danfoss ADAP-KOOL Manual

®
ADAP-KOOL AKD-LonWorks

6. How to I nstall Option in Frequency Converter

6.1.1. How to I nstall Option in Frequency Converter
I tems required to install a fieldbus option in the frequency converter:
- The fieldbus option
-
Fieldbus option adaptor frame for the AKD 102. This frame is deeper than the standard frame, to allow space for the fieldbus option beneath
-
Decoupling plate (only for A1 and A2 enclosures)
Please refer to the section How to I nstall
Please note, for connection of screen, please refer to the graphic in section 4.1.1
in this manual for connections.
MG.11.P1.02
6. How to I nstall Option in Frequency Con-
130BT611.10
The LonWorks Option .
verter
6
15