Danfoss VLT Automation VT Drive FC 322 Programming Manual page 118

2 Parameter Description
8-52 DC Brake Select
Option:
[0] Digital input
2
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par. 8-01
8-53 Start Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par. 8-01
8-54 Reversing Select
Option:
[0] * Digital input
[1] Bus
[2] Logic AND
[3] Logic OR
NB!
This parameter is active only when par. 8-01
116
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Select control of the DC brake via the terminals (digital input) and/or via the fieldbus.
Activates Start command via a digital input.
Activates Start command via the serial communication port or fieldbus option.
Activates Start command via the fieldbus/serial communication port, AND additionally via one of the
digital inputs.
Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.
Control Site is set to [0] Digital and control word
Function:
Select control of the frequency converter start function via the terminals (digital input) and/or via
the fieldbus.
Activates Start command via a digital input.
Activates Start command via the serial communication port or fieldbus option.
Activates Start command via the fieldbus/serial communication port, AND additionally via one of the
digital inputs.
Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.
Control Site is set to [0] Digital and control word
Function:
Select control of the frequency converter reverse function via the terminals (digital input) and/or
via the fieldbus.
Activates Reverse command via a digital input.
Activates Reverse command via the serial communication port or fieldbus option.
Activates Reverse command via the fieldbus/serial communication port, AND additionally via one of
the digital inputs.
Activates Reverse command via the fieldbus/serial communication port OR via one of the digital
inputs.
Control Site Digital and control word
is set to [0]
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Programming Guide
.
.
.