Table of Contents
Advertisement
2 Parameter Description
23-64 Timed Period Stop
Range:
Application
[Application dependant]
dependent*
2
NB!
When mounting an Analog I/O MCB109 option card, a battery back up of the date and time is included.
23-65 Minimum Bin Value
Range:
Application
[Application dependant]
dependent*
23-66 Reset Continuous Bin Data
Option:
[0] *
Do not reset
[1]
Do reset
23-67 Reset Timed Bin Data
Option:
[0] *
Do not reset
[1]
Do reset
2.20.5 23-8* Payback counter
The VLT Automation VT Drive includes a feature which can give a rough calculation on payback in cases where the frequency converter has been installed
in an existing plant to ensure energy saving by changing from fixed to variable speed control. Reference for the savings is a set value to represent the
average power yielded before the upgrade with variable speed control.
The difference between the Reference Power at fixed speed and the Actual Power yielded with speed control represent the actual saving.
238
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Function:
Function:
Select
Do reset
[1] to reset all values in par. 23-61
After pressing OK the setting of the parameter value will automatically change to
Function:
Select
Do reset
[1] to reset all counters in par. 23-62
After pressing OK the setting of the parameter value will automatically change to
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Programming Guide
Continuous Bin Data
.
Do not reset
Timed Bin Data
.
Do not reset
[0].
[0].
Advertisement
Table of Contents
