Danfoss VLT Automation VT Drive FC 322 Programming Manual page 179

VLT Automation VT Drive FC322
Programming Guide
16-39 Control Card Temp.
Range:
0 C* [0 - 100 C]
16-40 Logging Buffer Full
Option:
[0] * No
[1] Yes
2.15.5 16-5* Ref. & Feedb.
Parameters for reporting the reference and feedback input.
16-50 External Reference
Range:
0.0* [-200.0 - 200.0 ]
16-52 Feedback [Unit]
Range:
0.000 Proc- [-999999.999 - 999999.999 Proc-
essCtrlU- essCtrlUnit]
nit*
16-53 Digi Pot Reference
Range:
0.00* [-200.00 - 200.00 ]
16-54 Feedback 1 [Unit]
Range:
0.000 Proc- [-999999.999 - 999999.999 Proc-
essCtrlU- essCtrlUnit]
nit*
16-55 Feedback 2 [Unit]
Range:
0.000 Proc- [-999999.999 - 999999.999 Proc-
essCtrlU- essCtrlUnit]
nit*
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
View the temperature on the control card, stated in C.
Function:
View whether the logging buffer is full (see par. 15-1*). The logging buffer will never be full when
par. 15-13 Logging Mode is set to Log always
Function:
View the total reference, the sum of digital, analog, preset, bus and freeze references, plus catch-
up and slow-down.
Function:
View value of resulting feedback value after processing of Feedback 1-3 (see par. 16-54
1 [Unit] Feedback 2 [Unit]
, par. 16-55
See par. 20-0* Feedback .
The value is limited by settings in par. 20-13 and par. 20-14. Units as set in par. 20-12
Feedback Unit .
Function:
View the contribution of the Digital Potentiometer to the actual reference.
Function:
View value of Feedback 1, see par. 20-0*
The value is limited by settings in par. 20-13
Reference/Feedb. . Units as set in par. 20-12
Function:
View value of Feedback 2, see par. 20-0*
The value is limited by settings in par. 20-13 and par. 20-14. Units as set in par. 20-12
Feedback Unit
.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
[0].
and par. 16-56) in the feedback manager.
Feedback .
Minimum Reference/Feedb.
and par. 20-14
Reference/Feedback Unit .
Feedback
.
2
Feedback
Reference/
Maximum
Reference/
177