Table of Contents
Advertisement
VLT Automation VT Drive FC322
Programming Guide
0-76 DST/Summertime Start
Range:
Application
[Application dependant]
dependent*
0-77 DST/Summertime End
Range:
Application
[Application dependant]
dependent*
0-79 Clock Fault
Option:
[0] *
Disabled
[1]
Enabled
0-81 Working Days
Array with 7 elements [0] - [6] displayed below parameter number in display. Press OK and step between elements by means of
the LCP.
Option:
[0] *
No
[1]
Yes
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter number in display. Press OK and step between elements by means of
the LCP.
Range:
Application
[Application dependant]
dependent*
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter number in display. Press OK and step between elements by means of
on the LCP.
Range:
Application
[Application dependant]
dependent*
0-89 Date and Time Readout
Range:
0*
[0 - 0 ]
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Function:
Function:
Enables or disables the clock warning, when the clock has not been set or has been reset due to a
power-down and no backup is installed.
Function:
Set for each weekday if it is a working day or a non-working day. First element of the array is
Monday. The working days are used for Timed Actions.
Function:
Function:
Function:
Displays the current date and time. The date and time is updated continuously.
The clock will not begin counting until a setting different from default has been made in
par. 0-70
Date and Time
.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
2
and
buttons on
and
buttons on
and
buttons
39
Advertisement
Table of Contents
