Main Menu - Can Fieldbus - Group - Danfoss VLT Automation VT Drive FC 322 Programming Manual

2 Parameter Description

2.10 Main Menu - CAN Fieldbus - Group 10

2.11.1 10-** DeviceNet and CAN Fieldbus
2
Parameter group for DeviceNet CAN fieldbus parameters.
2.11.2 10-0* Common Settings
Parameter group for configuring common settings for CAN fieldbus options.
10-00 CAN Protocol
Option:
[1] * DeviceNet
NB!
The options depend on installed option
10-01 Baud Rate Select
Option:
[16] 10 Kbps
[17] 20 Kbps
[18] 50 Kbps
[19] 100 Kbps
[20] * 125 Kbps
[21] 250 Kbps
[22] 500 Kbps
[23] 800 Kbps
[24] 1000 Kbps
10-02 MAC ID
Range:
Application [Application dependant]
dependent*
10-05 Readout Transmit Error Counter
Range:
0* [0 - 255 ]
10-06 Readout Receive Error Counter
Range:
0* [0 - 255 ]
132
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
View the active CAN protocol.
Function:
Select the fieldbus transmission speed. The selection must correspond to the transmission speed of
the master and the other fieldbus nodes.
Function:
Function:
View the number of CAN control transmission errors since the last power-up.
Function:
View the number of CAN control receipt errors since the last power-up.
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Programming Guide