Danfoss VLT Automation VT Drive FC 322 Programming Manual page 135

Hide thumbs Also See for VLT Automation VT Drive FC 322:
Table of Contents

Advertisement

VLT Automation VT Drive FC322
Programming Guide
10-07 Readout Bus Off Counter
Range:
0*
[0 - 255 ]
2.11.3 10-1* DeviceNet
Parameters specific to the DeviceNet fieldbus.
10-10 Process Data Type Selection
Option:
[0] *
INSTANCE 100/150
[1]
INSTANCE 101/151
[2]
INSTANCE 20/70
[3]
INSTANCE 21/71
10-11 Process Data Config Write
Option:
[0] *
None
[302]
Minimum Reference
[303]
Maximum Reference
[341]
Ramp 1 Ramp Up Time
[342]
Ramp 1 Ramp Down Time
[351]
Ramp 2 Ramp Up Time
[352]
Ramp 2 Ramp Down Time
[380]
Jog Ramp Time
[381]
Quick Stop Ramp Time
[411]
Motor Speed Low Limit [RPM]
[413]
Motor Speed High Limit [RPM]
[416]
Torque Limit Motor Mode
[417]
Torque Limit Generator Mode
[590]
Digital & Relay Bus Control
[593]
Pulse Out #27 Bus Control
[595]
Pulse Out #29 Bus Control
[597]
Pulse Out #X30/6 Bus Control
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
View the number of Bus Off events since the last power-up.
Function:
Select the Instance (telegram) for data transmission. The Instances available are dependent upon
Control Profile
the setting of par. 8-10
When par. 8-10
Control Profile
is set to [0]
[0] and [1] are available.
When par. 8-10
Control Profile
is set to [5]
[2] and [3] are available.
Instances 100/150 and 101/151 are Danfoss-specific. Instances 20/70 and 21/71 are ODVA-specific
AC Drive profiles.
For guidelines in telegram selection, please refer to the DeviceNet Operating Instructions.
Note that a change to this parameter will be executed immediately.
Function:
Select the process write data for I/O Assembly Instances 101/151. Elements [2] and [3] of this array
can be selected. Elements [0] and [1] of the array are fixed.
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
.
FC profile
, par. 10-10
Process Data Type Selection
ODVA
, par. 10-10
Process Data Type Selection
2
options
options
133

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vlt dc 322

Table of Contents