Table of Contents
Advertisement
2 Parameter Description
2
Once a second, the value of the operating variable selected is registered. If a value has been registered to equal 13%, the counter "10% - <20%" will
be updated with the value "1". If the value stays at 13% for 10s, then "10" will be added to the counter value.
The contents of counters can be displayed as bars on LCP. Select
Comparison
.
NB!
The counters starts counting whenever the frequency converter is powered-up. Power cycle shortly after a reset will zero the counters.
EEProm data are updated once per hour.
23-60 Trend Variable
Option:
[0] *
Power [kW]
[1]
Current [A]
[2]
Frequency [Hz]
[3]
Motor Speed [RPM]
236
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Quick Menu
>
Loggings
:
Function:
Select the desired operating variable to be monitored for Trending.
Power yielded to the motor. Reference for the relative value is the rated motor power programmed
in par. 1-20
Motor Power [kW]
or par. 1-21
Power [kW]
Power [hp]
par. 16-10
or par. 16-11
Output current to the motor. Reference for the relative value is the rated motor current programmed
in par. 1-24
Motor Current
. Actual value can be read in par. 16-14
Output frequency to the motor. Reference for the relative value is the maximum output frequency
programmed in par. 4-14
Motor Speed High Limit [Hz]
par. 16-13
Frequency
.
Speed of the motor. Reference for relative value is the maximum motor speed programmed in
par. 4-13
Motor Speed High Limit [RPM]
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Trending Continued Bin / Trending Timed Bin / Trending
Motor Power [HP]
. Actual value can be read in
.
Motor Current
. Actual value can be read in
.
Programming Guide
.
Advertisement
Table of Contents
