Danfoss VLT Automation VT Drive FC 322 Programming Manual page 171

VLT Automation VT Drive FC322
Programming Guide
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
15-13 Logging Mode
Option:
[0] * Log always
[1] Log once on trigger
15-14 Samples Before Trigger
Range:
50* [0 - 100 ]
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Log always
Select [0] for continuous logging.
Select Log once on trigger [1] to conditionally start and stop logging using par. 15-12
Event and par. 15-14 Samples Before Trigger
Function:
Enter the percentage of all samples prior to a trigger event which are to be retained in the log. See
Trigger Event
also par. 15-12 and par. 15-13
MG.20.W1.22 - VLT is a registered Danfoss trademark
2 Parameter Description
.
Logging Mode
.
2
Trigger
169