Table of Contents
Advertisement
2 Parameter Description
4-14 Motor Speed High Limit [Hz]
Range:
Application
[Application dependant]
dependent*
2
NB!
Max. output frequency cannot exceed 10% of the inverter switching frequency (par. 14-01
4-16 Torque Limit Motor Mode
Range:
Application
[Application dependant]
dependent*
4-17 Torque Limit Generator Mode
Range:
100.0 %*
[Application dependant]
4-18 Current Limit
Range:
110 %*
[1 - 1000 %]
4-19 Max Output Frequency
Range:
Application
[1.0 - 1000.0 Hz]
dependent*
66
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx
Function:
Function:
Function:
Enter the maximum torque limit for generator mode operation. The torque limit is active in the speed
range up to and including the rated motor speed (par. 1-25
par. 14-25
Trip Delay at Torque Limit
for further details.
Configuration Mode
If a setting in par. 1-00
par. 4-17
Torque Limit Generator Mode
Function:
Enter the current limit for motor and generator operation. To protect the motor from reaching the
stalling torque, the default setting is 1.1 x the rated motor torque (calculated value). If a setting in
par. 1-00 to par. 1-26 is changed, par. 4-18 is not automatically reset to the default setting.
Function:
Enter the maximum output frequency value. par. 4-19
limit on the frequency converter output frequency for improved safety in applications where acci-
dental over-speeding must be avoided. This absolute limit applies to all configurations and is inde-
pendent of the setting in par. 1-00
Configuration Mode
the motor is running.
MG.20.W1.22 - VLT is a registered Danfoss trademark
VLT Automation VT Drive FC322
Switching Frequency
).
Motor Nominal Speed
Motor Rotation Check
to par. 1-28
is not automatically reset to the default settings.
Max Output Frequency
specifies the absolute
. This parameter cannot be adjusted while
Programming Guide
). Refer to
is changed,
Advertisement
Table of Contents
