Honda ACCORD HYBRID 2005 Service Manual page 50

Starting System
S t a r t e r C i r c u i t T r o u b l e s h o o t i n g ( c o n t ' d )
Make sure the transmission is in park or neutral,
and set the parking brake. Disconnect the BLK/WHT
w i r e f r o m the starter solenoid S t e r m i n a l . Connect
a j u m p e r w i r e f r o m the battery positive terminal to
the solenoid t e r m i n a l .
Did the starter crank the engine?
Y E S — G o t o step 8.
N O — R e m o v e the starter, and repair or replace as
necessary. •
8. Check the No. 51 (7.5 A) fuse in the auxiliary fuse
holder A.
Is the fuse OK ?
Y E S — I n s t a l l the No. 51 (7.5 A) fuse. Go to step 9.
NO—Replace the fuse, and recheck.B
9. Remove the starter cut relay f r o m the under-dash
fuse/relay box, and test it (see page 22-72).
Is the relay OK ?
Y E S — G o t o step 10.
NO—Replace the starter cut relay. •
10. Check the ignition switch (see page 22-74).
Is the ignition switch OK?
Y E S — G o t o step 11.
NO—Replace the ignition switch. •
11. Remove the No. 51 (7.5 A) fuse f r o m the auxiliary
fuse holder A, and check for continuity between
starter cut relay 4P socket terminal No. 1 and body
g r o u n d .
S T A R T E R C U T R E L A Y 4P S O C K E T
1
2
4 3
T e r m i n a l side of f e m a l e t e r m i n a l s
Is there continuity?
Y E S — R e p a i r a short in the w i r e between the under-
dash fuse/relay box and ignition switch, or under-
dash fuse/relay box and auxiliary fuse holder A.
Reinstall the No. 51 (7.5 A) fuse. •
NO — G o t o step 12.
4-6