Honda ACCORD HYBRID 2005 Service Manual page 125

17. Lower the engine to proper position.
18. Install the side engine m o u n t bracket (A), then
tighten the bolts in the n u m b e r e d sequence s h o w n .
© 1 0 x 1.25 m m
54 N m (5.5 k g f m , 40 Ibf-ft)
® 12 x 1.25 m m
64 N m
(6.5 k g f m , 47 Ibf-ft)
6 x 1.0 m m
12 N m
(1.2 k g f m ,
<f% 8.7 Ibf-ft)
\
19. Install the g r o u n d cable (B).
20. Remove the engine support hanger.
2 1 . Install the right front strut bar (A), then install the
throttle cable clamp (B) and accelerator pedal
position (APP) sensor m o u n t i n g bolt (C).
8 x 1.25 m m
22 N m
I k g f m , 16 Ibf-ft)
B
\
8 x 1.25 m m
22 N m
(2.2 k g f m , 16 Ibf-ft)
6 x 1.0 mm
9.8 N m (1.0 k g f m , 7.2 Ibf-ft)
22. Install the passenger's cowl cover (see page
20-113).
23. Install the right side w i n d s h i e l d w i p e r a r m
(see page 22-221).
24. Install the A/C compressor motor power cable
clamps.
25. Install the front grille cover (see step 1 on page
20-111).
26. Install the A/C compressor belt auto-tensioner
(see page 21-102).
27. Install the A/C compressor belt (see page 21-100).
(cont'd)
6-23