T I M I N G Belt Removal - Honda ACCORD HYBRID 2005 Service Manual

Cylinder Head
T i m i n g B e l t R e m o v a l
Special Tools Required
Engine support hanger, A and Reds AAR-T-12566
(available t h r o u g h Honda Tool and Equipment p r o g r a m ,
888-424-6857)
1. Raise the front of the vehicle, and support it w i t h
safety stands in the proper locations (see page 1-7).
2. Remove the right front w h e e l .
3. Remove the splash shield.
4. Turn the crankshaft so its white mark (A) lines up
w i t h the pointer (B).
5. Check that the No. 1 piston t o p dead center (TDC)
mark (A) on the front camshaft pulley and the
pointer (B) on the front upper cover are aligned.
6. Remove the A/C compressor belt (see page 21-100).
7. Remove the A/C compressor belt auto-tensioner
(see page 21-102).
8. Remove the crankshaft pulley (see page 6-14).
9. Remove the front grille cover (see step 1 on page
20-111).
10. Remove the A/C compressor m o t o r power cable
clamps.
6-16