Cylinder Head Cover Removal - Honda ACCORD HYBRID 2005 Service Manual

Cylinder Head
Cylinder Head Cover Removal
FRONT
1. Remove the intake m a n i f o l d (see page 9-3).
2. Remove the three ignition coils f r o m the front
cylinder head (see page 4-22).
3. Remove the t w o bolts (A) securing the harness
holder, and remove the dipstick (B).
4. Remove the front cylinder head cover.
REAR
1. Remove the right side w i n d s h i e l d wiper arm
(see page 22-221).
2. Remove the passenger's cowl cover (see page
20-113).
3. Remove the harness c l a m p (A) and accelerator
pedal position (APP) sensor m o u n t i n g bolt (B), then
remove the right front strut bar (C) f r o m the body.
4. Remove the intake m a n i f o l d (see page 9-3).
5. Remove the three ignition coils f r o m the rear
cylinder head (see page 4-22).
6. Disconnect the three injector connectors, VTEC
solenoid valve connector, and VTEC oil pressure
switch connector f r o m the rear cylinder head.
6-32