Honda ACCORD HYBRID 2005 Service Manual page 122

Cylinder Head
T i m i n g B e l t I n s t a l l a t i o n (cont'd)
3. Set the camshaft pulleys to TDC by aligning the
TDC marks (A) on the camshaft pulleys w i t h the
pointers (B) on the back covers.
FRONT:
4. A p p l y liquid thread lock to the idler pulley bolt, then
loosely install the idler pulley.
5. If the auto-tensioner has extended and the t i m i n g
belt cannot be installed, p e r f o r m the t i m i n g belt
replacement procedure (see page 6-24).
6. Install the t i m i n g belt in a counterclockwise
sequence starting w i t h the drive pulley. Take care
not to damage the t i m i n g belt w h e n installing it.
- 1 Drive pulley (A)
- 2 Idler pulley (B)
- 3 Front camshaft pulley (C)
- 4 Water p u m p pulley (D)
- 5 Rear camshaft pulley (E)
- 6 Adjusting pulley (F)
D
7. Tighten the idler pulley bolt.
6-20