T I M I N G Belt Inspection - Honda ACCORD HYBRID 2005 Service Manual

2. Install the crankshaft pulley, and tighten the bolt.
Do not use an impact w r e n c h .
- 1 Hold the pulley w i t h the holder handle (A) and
crankshaft pulley holder (B), then tighten the
bolt to 64 N-m (6.5 kgf-m, 47 Ibf-ft) w i t h a
t o r q u e w r e n c h and a 19 m m socket (C).
- 2 Mark (D) the bolt head and crankshaft pulley as
s h o w n , then tighten the bolt an additional 60 °
(The mark on the bolt head lines up w i t h the
mark on the crankshaft pulley).
A
07JAB-001020A
C
07JAA-001020A
(or commercially available)
D
3. Install the A/C compressor belt (see page 21-100).
4. Install the splash shield.
5. Install the right front w h e e l .
T i m i n g B e l t I n s p e c t i o n
1. Remove the intake m a n i f o l d cover (see step 11 on
page 5-3).
2. Remove the front upper cover.
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibfft)
3. Inspect the t i m i n g belt for cracks and oil or coolant
soaking. Replace the belt if it is cracked, or is oil or
coolant soaked. Remove any oil or solvent that gets
on the belt.
6-15