Honda ACCORD HYBRID 2005 Service Manual page 101

10. Support the engine w i t h a jack and w o o d block
under the oil pan.
11. Remove the harness clamp (A), then disconnect the
front active control engine m o u n t actuator
connector (B).
12. Remove the front m o u n t stop (C), then remove the
front m o u n t bolt (D).
13. Remove the front m o u n t (E).
14. Install in the reverse order of removal.
15. Refill the radiator w i t h engine coolant, and bleed
air f r o m the cooling system w i t h the heater valve
open (see step 8 on page 10-7).